-
- About an hour
Boucles d'oreilles créoles en perles de rocaille de style bohémien
| Étape 1 |
Make sure two of the large jump rings are closed and add a dab of glue over the seam. Let dry, then set one aside. |
| Étape 2 |
Brick stitch eight white 6/0 seed beads along the bottom of each one of the two large jump rings with a needle and weaving thread. |
| Étape 3 |
Turn your work so you are working up and from left to right. Add a turquoise 11/0 and Copper superduo bead to your needle, slide it under the thread bridge of the first two 6/0 beads from previous row, then pull through until your beads sit on top of the previous row. Now, run your needle back up the 11/0 turquoise bead, from the bottom through the top, and pull thread tight. Run your needle through the bottom hole of the superduo bead. |
| Étape 4 |
Add a 11/0 turquoise seed bead to your needle, run it under the same thread bridge as in Step 3 (but to the right of the superduo), pull tight, run your needle back up through the bead and pull tight so it sits on top of the previous row. |
| Étape 5 |
Add a superduo and a 11/0 seed bead to your needle and run it through the next thread bridge. Pull tight, then run your needle back up through the 11/0 bead and pull tight so it sits on top of the previous row. |
| Étape 6 |
Repeat Step 5 across until you have eight superduos and nine 11/0 seed beads on this row. |
| Étape 7 |
Turn your work and thread your needle through the top hole of your first superduo, add another superduo, then through the top hole of your second superduo. Pull tight. |
| Étape 8 |
Add a 6/0 seed bead and run your needle and thread through the top hole in the next superduo. |
| Étape 9 |
Repeat Steps 7-8 across the row. |
| Étape 10 |
Turn your work. Run your needle and thread through the first three superduo beads. Add five 11/0 seed beads, skip over the top of the 6/0 bead from the previous row. Repeat two more times across the rest of the row. |
| Étape 11 |
Run the ends through adjacent beads several times then tie as close to a bead as possible. Add a dab of glue to the knot, let dry, then trim excess thread. |
| Étape 12 |
Cut four small pieces of thin wire. Wire wrap the beaded jump ring to the top, inside curve of a teardrop earring, as shown. Hide the seam of the large jump ring under a wire wrap. |
| Étape 13 |
Repeat Steps 2-12 for a second earring. |
-
20001577Vous aurez besoin de : 1No d’article 10269989Promotions
5,99$- Couleur: Blanc
- Taille:
- Couleur: Blanc
- Taille:
- Couleur: Blanc
- Taille:
-
809188169Vous aurez besoin de : 1No d’article 10104818Promotions
19,99$- Couleur: Givre
- Taille: 0.006 po
- Couleur: Givre
- Taille: 0.006 po
- Couleur: Givre
- Taille: 0.006 po
-
20000184Vous aurez besoin de : 1No d’article 10627223Promotions
6,99$- Couleur: Bleu turquoise
- Taille: 11/0
- Couleur: Bleu turquoise
- Taille: 11/0
- Couleur: Bleu turquoise
- Taille: 11/0
-
Vous aurez besoin de : 1No d’article 10627281Promotions
11,99$
Products
-
Vous aurez besoin de : 1No d’article 10315203Promotions
19,99$ -
Vous aurez besoin de : 1No d’article 10454201Promotions
9,99$ -
809188169Vous aurez besoin de : 1No d’article 10442850Promotions
6,99$- Couleur: Argent
- Taille: 28 ga
- Couleur: Argent
- Taille: 28 ga
- Couleur: Argent
- Taille: 28 ga
Produits
| Étape 1 |
Make sure two of the large jump rings are closed and add a dab of glue over the seam. Let dry, then set one aside. |
| Étape 2 |
Brick stitch eight white 6/0 seed beads along the bottom of each one of the two large jump rings with a needle and weaving thread. |
| Étape 3 |
Turn your work so you are working up and from left to right. Add a turquoise 11/0 and Copper superduo bead to your needle, slide it under the thread bridge of the first two 6/0 beads from previous row, then pull through until your beads sit on top of the previous row. Now, run your needle back up the 11/0 turquoise bead, from the bottom through the top, and pull thread tight. Run your needle through the bottom hole of the superduo bead. |
| Étape 4 |
Add a 11/0 turquoise seed bead to your needle, run it under the same thread bridge as in Step 3 (but to the right of the superduo), pull tight, run your needle back up through the bead and pull tight so it sits on top of the previous row. |
| Étape 5 |
Add a superduo and a 11/0 seed bead to your needle and run it through the next thread bridge. Pull tight, then run your needle back up through the 11/0 bead and pull tight so it sits on top of the previous row. |
| Étape 6 |
Repeat Step 5 across until you have eight superduos and nine 11/0 seed beads on this row. |
| Étape 7 |
Turn your work and thread your needle through the top hole of your first superduo, add another superduo, then through the top hole of your second superduo. Pull tight. |
| Étape 8 |
Add a 6/0 seed bead and run your needle and thread through the top hole in the next superduo. |
| Étape 9 |
Repeat Steps 7-8 across the row. |
| Étape 10 |
Turn your work. Run your needle and thread through the first three superduo beads. Add five 11/0 seed beads, skip over the top of the 6/0 bead from the previous row. Repeat two more times across the rest of the row. |
| Étape 11 |
Run the ends through adjacent beads several times then tie as close to a bead as possible. Add a dab of glue to the knot, let dry, then trim excess thread. |
| Étape 12 |
Cut four small pieces of thin wire. Wire wrap the beaded jump ring to the top, inside curve of a teardrop earring, as shown. Hide the seam of the large jump ring under a wire wrap. |
| Étape 13 |
Repeat Steps 2-12 for a second earring. |