![](https://imgs.michaels.com/MAM/assets/1/5E3C12034D34434F8A9BAAFDDF0F8E1B/img/969BE6704A4D4EE1908493EACD649A07/B_91236_1.jpg?fit=inside|1024:1024)
resin floral paperweight
Step 1 |
Wearing gloves, mix equal parts resin and hardener according to package instructions. |
Step 2 |
Pour half of mixture into triangle mould until about half full. |
Step 3 |
Pour a small amount of resin on flower to avoid excess bubbles. |
Step 4 |
Place prepared flower face down into the resin in the mould. |
Step 5 |
Pour the remaining resin into the mould. |
Step 6 |
Use a toothpick to position the flower as desired. |
Step 7 |
Apply heat with a heat gun to disperse any bubbles. |
Step 8 |
Allow to cure 12-24 hours until hardened. |
Step 9 |
Once dry, carefully remove project from mould. |
- Toothpick
Step 1 |
Wearing gloves, mix equal parts resin and hardener according to package instructions. |
Step 2 |
Pour half of mixture into triangle mould until about half full. |
Step 3 |
Pour a small amount of resin on flower to avoid excess bubbles. |
Step 4 |
Place prepared flower face down into the resin in the mould. |
Step 5 |
Pour the remaining resin into the mould. |
Step 6 |
Use a toothpick to position the flower as desired. |
Step 7 |
Apply heat with a heat gun to disperse any bubbles. |
Step 8 |
Allow to cure 12-24 hours until hardened. |
Step 9 |
Once dry, carefully remove project from mould. |