Print Project
monogram keychain
Step 1 |
Mix equal parts resin and resin hardener. Stir slowly with a silicone tool until completely mixed. Divide resin into three small plastic cups. |
Step 2 |
Add white translucent dye to one portion of resin. Add red changing powder to a second and blue changing powder to the third. Stir to incorporate into resin. |
Step 3 |
Add white resin to the top portion of each monogram letter. Add blue and red resin to the bottom half of each monogram letter. |
Step 4 |
Add Gold foil flakes to each monogram using a silicone tool. Apply heat with a heat gun to help any bubbles raise to the surface. Set aside. |
Step 5 |
Allow resin to cure in the moulds for 12-24 hours until set. Remove letters from moulds. |
Step 6 |
Use jewellery pliers to shorten a headpin. Glue shortened headpin into the top of each resin monogram. Attach monograms to keychains. |





- 3 - Small Plastic Cups
Step 1 |
Mix equal parts resin and resin hardener. Stir slowly with a silicone tool until completely mixed. Divide resin into three small plastic cups. |
Step 2 |
Add white translucent dye to one portion of resin. Add red changing powder to a second and blue changing powder to the third. Stir to incorporate into resin. |
Step 3 |
Add white resin to the top portion of each monogram letter. Add blue and red resin to the bottom half of each monogram letter. |
Step 4 |
Add Gold foil flakes to each monogram using a silicone tool. Apply heat with a heat gun to help any bubbles raise to the surface. Set aside. |
Step 5 |
Allow resin to cure in the moulds for 12-24 hours until set. Remove letters from moulds. |
Step 6 |
Use jewellery pliers to shorten a headpin. Glue shortened headpin into the top of each resin monogram. Attach monograms to keychains. |