1. Home
  2. /
  3. Projects /
  4. Jewelry Ideas /
  5. Necklaces
  6. / White and Gold Resin Pendant Beaded Necklace
Time Required :
Over an hour
Beginner
Beginner
You're new to the skills necessary to complete this project, or maybe you've tried them just once or twice before.

white and gold resin pendant beaded necklace

Create a unique pendant in minutes with UV resin! Use resin tint and fillers to customise your pendant.
Share your project photos with #MakeItWithMichaels

Print Project

Step 1

Pour some resin into a small silicone cup. Add a few drops of white tint and mix well with a craft stick. Add more if needed.
TIP: Wipe the silicone cup with a paper towel to clean.

Step 2

Prop the silicone mould onto a craft stick or two so the top of the mould is slightly elevated.

Step 3

Pour white resin into your mould until it is about 2/3 full. Tap the mould to make sure no air bubbles.

Step 4

Cure the mould under the UV lamp for several minutes until completely cured. Cool for 1-2 minutes.

Step 5

Pour a little more resin into a small silicone cup. Add a few drops of Gold tint and Gold flake filler, then mix well with a craft stick. Add more Gold drops if needed.

Step 6

Pour Gold resin into the mould until full.

Step 7

Repeat Step 4 then demould.

Step 8

Attach a cap to the top of the pendant with e6000® glue. Set aside to dry.

Step 9

Open a jump ring, slide on a lobster clasp and close the jump ring. Set aside.
TIP: To open and close a jump ring, simply grasp the jump ring on both sides with chain nose pliers and twist the ring open, from side-to-side. Never pull the jump ring which can cause distortion.

Step 10

Measure and cut 96" [243.8 cm] of transite. Fold the transite in half and attach to a close jump ring with a lark’s head knot. Add a dab of glue to the knot.
TIP: To make a lark’s head knot, fold the transite in half. Place the metal connector over the fold. Grab the ends of the transite, bring them up and over the metal connector, then through the fold of the transite. Pull and tighten the knot.

Step 11

Hold the transite ends together and slide on a bead. Push the bead against the jump ring and let the glue dry.
TIP: For the rest of the necklace, hold the transite cords together and slide beads into it as if they were one cord.

Step 12

Add about 20" [50.8 cm] of beads to the transite, slide on your resin pendant then repeat the same bead pattern, in the opposite direction, on the other half of the transite.

Step 13

Tie the end to the closed jump ring with the lobster clasp with a secure knot. Thread the excess back through a few beads, then add a generous amount of glue and let dry. Trim excess transite.

Share your project photos with #MakeItWithMichaels

Supplies
Materials
Materials
 
  • img
    809188156
    You’ll Need: 1

    12mm Lobster Clasps by Bead Landing™

    Item # 10473883 
    Save 40% off One Regular Price Item with code 401129230 - Exclusions apply See Details See Details
    Limit one coupon per product. Limit one coupon of each type per day. Limited to stock on hand. Void where prohibited. Valid only in Canada. EXCLUSIONS: Everyday Value program; clearance; buy & get items; custom framing; beverages & candy; books & magazines; gift cards; craft technology machines; Cricut, Silhouette. Exclusions subject to change. See Team Member for details.
    $5.99
    • Color: Gold Tone
    • Size: 12 mm
    • Color: Gold Tone
    • Size: 12 mm
    +More Colors
    • Color: Gold Tone
    • Size: 12 mm
    +More Colors
    +More Options
  • img
    You’ll Need: 1

    Blue Moon Studio™ UV Resin Craft Hard Type Resin, 0.85oz.

    Item # 10627464 
    Save 40% off One Regular Price Item with code 401129230 - Exclusions apply See Details See Details
    Limit one coupon per product. Limit one coupon of each type per day. Limited to stock on hand. Void where prohibited. Valid only in Canada. EXCLUSIONS: Everyday Value program; clearance; buy & get items; custom framing; beverages & candy; books & magazines; gift cards; craft technology machines; Cricut, Silhouette. Exclusions subject to change. See Team Member for details.
    $13.99
  • img
    You’ll Need: 1

    Blue Moon Studio™ UV Resin Craft Tint Mix 1

    Item # 10627465 
    Save 40% off One Regular Price Item with code 401129230 - Exclusions apply See Details See Details
    Limit one coupon per product. Limit one coupon of each type per day. Limited to stock on hand. Void where prohibited. Valid only in Canada. EXCLUSIONS: Everyday Value program; clearance; buy & get items; custom framing; beverages & candy; books & magazines; gift cards; craft technology machines; Cricut, Silhouette. Exclusions subject to change. See Team Member for details.
    $11.99
  • img
    You’ll Need: 1

    Blue Moon Studio™ UV Resin Craft Mixing Kit

    Item # 10627491 
    Save 40% off One Regular Price Item with code 401129230 - Exclusions apply See Details See Details
    Limit one coupon per product. Limit one coupon of each type per day. Limited to stock on hand. Void where prohibited. Valid only in Canada. EXCLUSIONS: Everyday Value program; clearance; buy & get items; custom framing; beverages & candy; books & magazines; gift cards; craft technology machines; Cricut, Silhouette. Exclusions subject to change. See Team Member for details.
    $6.99
  • img
    You’ll Need: 1

    Blue Moon Studio™ UV Resin Craft 3D Faceted Shapes Mould with Findings

    Item # 10627632 
    Save 40% off One Regular Price Item with code 401129230 - Exclusions apply See Details See Details
    Limit one coupon per product. Limit one coupon of each type per day. Limited to stock on hand. Void where prohibited. Valid only in Canada. EXCLUSIONS: Everyday Value program; clearance; buy & get items; custom framing; beverages & candy; books & magazines; gift cards; craft technology machines; Cricut, Silhouette. Exclusions subject to change. See Team Member for details.
    $13.99
  • img
    You’ll Need: 1

    Blue Moon Studio™ UV Resin Crafts Mega Filler Pack

    Item # 10628092 
    Save 40% off One Regular Price Item with code 401129230 - Exclusions apply See Details See Details
    Limit one coupon per product. Limit one coupon of each type per day. Limited to stock on hand. Void where prohibited. Valid only in Canada. EXCLUSIONS: Everyday Value program; clearance; buy & get items; custom framing; beverages & candy; books & magazines; gift cards; craft technology machines; Cricut, Silhouette. Exclusions subject to change. See Team Member for details.
    $22.99
 
Tools
Tools
 
  • img
    You’ll Need: 1

    Beadalon® Collapsible Eye Needles, Medium

    Item # 10427048 
    Save 40% off One Regular Price Item with code 401129230 - Exclusions apply See Details See Details
    Limit one coupon per product. Limit one coupon of each type per day. Limited to stock on hand. Void where prohibited. Valid only in Canada. EXCLUSIONS: Everyday Value program; clearance; buy & get items; custom framing; beverages & candy; books & magazines; gift cards; craft technology machines; Cricut, Silhouette. Exclusions subject to change. See Team Member for details.
    $6.99
  • img
    You’ll Need: 1

    Bead Organizer & Tool Set by Bead Landing™

    Item # 10315203 
    Save 40% off One Regular Price Item with code 401129230 - Exclusions apply See Details See Details
    Limit one coupon per product. Limit one coupon of each type per day. Limited to stock on hand. Void where prohibited. Valid only in Canada. EXCLUSIONS: Everyday Value program; clearance; buy & get items; custom framing; beverages & candy; books & magazines; gift cards; craft technology machines; Cricut, Silhouette. Exclusions subject to change. See Team Member for details.
    $19.99
  • img
    You’ll Need: 1

    Loops & Threads™ Straight Scissors

    Item # 10454201 
    Save 40% off One Regular Price Item with code 401129230 - Exclusions apply See Details See Details
    Limit one coupon per product. Limit one coupon of each type per day. Limited to stock on hand. Void where prohibited. Valid only in Canada. EXCLUSIONS: Everyday Value program; clearance; buy & get items; custom framing; beverages & candy; books & magazines; gift cards; craft technology machines; Cricut, Silhouette. Exclusions subject to change. See Team Member for details.
    $9.99
  • img
    You’ll Need: 1

    Blue Moon Studio™ UV Resin Craft Pink Curing USB Lamp

    Item # 10627462 
    Save 40% off One Regular Price Item with code 401129230 - Exclusions apply See Details See Details
    Limit one coupon per product. Limit one coupon of each type per day. Limited to stock on hand. Void where prohibited. Valid only in Canada. EXCLUSIONS: Everyday Value program; clearance; buy & get items; custom framing; beverages & candy; books & magazines; gift cards; craft technology machines; Cricut, Silhouette. Exclusions subject to change. See Team Member for details.
    $19.99
  • img
    You’ll Need: 1

    Blue Moon Studio™ UV Resin Craft Silicone Mat

    Item # 10627495 
    Save 40% off One Regular Price Item with code 401129230 - Exclusions apply See Details See Details
    Limit one coupon per product. Limit one coupon of each type per day. Limited to stock on hand. Void where prohibited. Valid only in Canada. EXCLUSIONS: Everyday Value program; clearance; buy & get items; custom framing; beverages & candy; books & magazines; gift cards; craft technology machines; Cricut, Silhouette. Exclusions subject to change. See Team Member for details.
    $6.99
 
You’ll Also Need
  • Paper Towels
  • Ruler
  • USB Power Source
Instructions
Step 1

Pour some resin into a small silicone cup. Add a few drops of white tint and mix well with a craft stick. Add more if needed.
TIP: Wipe the silicone cup with a paper towel to clean.

Step 2

Prop the silicone mould onto a craft stick or two so the top of the mould is slightly elevated.

Step 3

Pour white resin into your mould until it is about 2/3 full. Tap the mould to make sure no air bubbles.

Step 4

Cure the mould under the UV lamp for several minutes until completely cured. Cool for 1-2 minutes.

Step 5

Pour a little more resin into a small silicone cup. Add a few drops of Gold tint and Gold flake filler, then mix well with a craft stick. Add more Gold drops if needed.

Step 6

Pour Gold resin into the mould until full.

Step 7

Repeat Step 4 then demould.

Step 8

Attach a cap to the top of the pendant with e6000® glue. Set aside to dry.

Step 9

Open a jump ring, slide on a lobster clasp and close the jump ring. Set aside.
TIP: To open and close a jump ring, simply grasp the jump ring on both sides with chain nose pliers and twist the ring open, from side-to-side. Never pull the jump ring which can cause distortion.

Step 10

Measure and cut 96" [243.8 cm] of transite. Fold the transite in half and attach to a close jump ring with a lark’s head knot. Add a dab of glue to the knot.
TIP: To make a lark’s head knot, fold the transite in half. Place the metal connector over the fold. Grab the ends of the transite, bring them up and over the metal connector, then through the fold of the transite. Pull and tighten the knot.

Step 11

Hold the transite ends together and slide on a bead. Push the bead against the jump ring and let the glue dry.
TIP: For the rest of the necklace, hold the transite cords together and slide beads into it as if they were one cord.

Step 12

Add about 20" [50.8 cm] of beads to the transite, slide on your resin pendant then repeat the same bead pattern, in the opposite direction, on the other half of the transite.

Step 13

Tie the end to the closed jump ring with the lobster clasp with a secure knot. Thread the excess back through a few beads, then add a generous amount of glue and let dry. Trim excess transite.

Share your project photos with #MakeItWithMichaels

Project Reviews