Pébéo Gedeo Bio-Based Crystal Resin & Hardener
Item #
10643703
$149.99
Promotions
Pébéo Gedeo Bio-Based Crystal Resin & Hardener
$149.99
Promotions
Details
https://canada.michaels.com/en/pebeo-gedeo-bio-based-crystal-resin-and-hardener/10643703.htmlProduct Actions
Description
The Gedeo Bio-Based Crystal Resin is a high-gloss, very transparent and glossy resin, bio-based at more than 50%. Its liquid texture is ideal for use by crafters and artists for pouring in molds or bordered surfaces, inclusions (including natural elements, such as dried leaves), and applying as a high gloss coating to objects and works of various mediums. Gedeo Bio-Based Resins are incomparably transparent, glossy and solid, while being more respectful of the environment and safer for artists. Their low-odor, two-component epoxy resin system (resin and hardener) allows for remarkable ease-of-use and a bubble-free, non-yellowing finish.
Details:
Details:
- Transparent
- Glossy finish
- Bio-based at more than 50%
- Two-component epoxy resin system
- Great for molding decorative objects, frames, jewelry and more
- Gives a varnished effect to your creations
- 2 L Crystal resin A
- 1 L Crystal B curing agent hardener
Instructions:
Into a clean, dry container, first pour 1 dose of Crystal B curing agent and then 2 doses of Crystal Resin A. Mix the two components thoroughly into the corners of the container. (Incomplete mixing does not guarantee curing, while over-vigorous mixing causes bubble formation). Transfer the mixture to a second container and mix again to ensure homogeneity of the resin and optimal curing. Pour into the medium of your choice. Leave to dry for 24 hours away from dust. The setting is progressive and variable depending on the ambient temperature and humidity. Allows the creation of molds, inclusions up to 2 cm thick for a small volume, coatings, or laminates.
Into a clean, dry container, first pour 1 dose of Crystal B curing agent and then 2 doses of Crystal Resin A. Mix the two components thoroughly into the corners of the container. (Incomplete mixing does not guarantee curing, while over-vigorous mixing causes bubble formation). Transfer the mixture to a second container and mix again to ensure homogeneity of the resin and optimal curing. Pour into the medium of your choice. Leave to dry for 24 hours away from dust. The setting is progressive and variable depending on the ambient temperature and humidity. Allows the creation of molds, inclusions up to 2 cm thick for a small volume, coatings, or laminates.
The Gedeo Bio-Based Crystal Resin is a high-gloss, very transparent and glossy resin, bio-based at more than 50%. Its liquid texture is ideal for use by crafters and artists for pouring in molds or bordered surfaces, inclusions (including natural elements, such as dried leaves), and applying as a high gloss coating to objects and works of various mediums. Gedeo Bio-Based Resins are incomparably transparent, glossy and solid, while being more respectful of the environment and safer for artists. Their low-odor, two-component epoxy resin system (resin and hardener) allows for remarkable ease-of-use and a bubble-free, non-yellowing finish.
Details:
Details:
- Transparent
- Glossy finish
- Bio-based at more than 50%
- Two-component epoxy resin system
- Great for molding decorative objects, frames, jewelry and more
- Gives a varnished effect to your creations
- 2 L Crystal resin A
- 1 L Crystal B curing agent hardener
Instructions:
Into a clean, dry container, first pour 1 dose of Crystal B curing agent and then 2 doses of Crystal Resin A. Mix the two components thoroughly into the corners of the container. (Incomplete mixing does not guarantee curing, while over-vigorous mixing causes bubble formation). Transfer the mixture to a second container and mix again to ensure homogeneity of the resin and optimal curing. Pour into the medium of your choice. Leave to dry for 24 hours away from dust. The setting is progressive and variable depending on the ambient temperature and humidity. Allows the creation of molds, inclusions up to 2 cm thick for a small volume, coatings, or laminates.
Into a clean, dry container, first pour 1 dose of Crystal B curing agent and then 2 doses of Crystal Resin A. Mix the two components thoroughly into the corners of the container. (Incomplete mixing does not guarantee curing, while over-vigorous mixing causes bubble formation). Transfer the mixture to a second container and mix again to ensure homogeneity of the resin and optimal curing. Pour into the medium of your choice. Leave to dry for 24 hours away from dust. The setting is progressive and variable depending on the ambient temperature and humidity. Allows the creation of molds, inclusions up to 2 cm thick for a small volume, coatings, or laminates.