
mystic moon resin prism
Step 1 |
Mix a small amount of resin as directed in the packaging. |
Step 2 |
Pour the clear contents into the mould and set aside for 4-6 hours. |
Step 3 |
Repeat Step 1 with a larger amount of resin. |
Step 4 |
Add a drop of blue and a few drops of red ink dye and mix well. Add more if needed to get the desired shade of purple; then add chunky holographic glitter. |
Step 5 |
Pour purple glitter resin into the mould on top of the setting clear. Set aside for 4-6 hours. |
Step 6 |
Repeat Step 1 with a larger amount, but smaller than in the purple, of resin. |
Step 7 |
Add several drops of black ink dye until you get the desired shade. |
Step 8 |
Pour black resin into the mould on top of the setting glittery purple. Set aside to let set for a full 24 hours. |
Step 9 |
Remove the diamond from mould. |
Step 10 |
Brush the bottom with liquid gilding. Allow it to peek out from the bottom with a little “messy” border. Let dry. |
Step 1 |
Mix a small amount of resin as directed in the packaging. |
Step 2 |
Pour the clear contents into the mould and set aside for 4-6 hours. |
Step 3 |
Repeat Step 1 with a larger amount of resin. |
Step 4 |
Add a drop of blue and a few drops of red ink dye and mix well. Add more if needed to get the desired shade of purple; then add chunky holographic glitter. |
Step 5 |
Pour purple glitter resin into the mould on top of the setting clear. Set aside for 4-6 hours. |
Step 6 |
Repeat Step 1 with a larger amount, but smaller than in the purple, of resin. |
Step 7 |
Add several drops of black ink dye until you get the desired shade. |
Step 8 |
Pour black resin into the mould on top of the setting glittery purple. Set aside to let set for a full 24 hours. |
Step 9 |
Remove the diamond from mould. |
Step 10 |
Brush the bottom with liquid gilding. Allow it to peek out from the bottom with a little “messy” border. Let dry. |