1. Home
  2. /
  3. Projects /
  4. Tech /
  5. Cricut®
  6. / Glass Etched Stemless Wine Glasses
Time Required :
About 30 minutes
Intermediate
Intermediate
You're somewhat experienced with the skills necessary to complete this project, but you haven't mastered all the elements, yet.

glass etched stemless wine glasses

Add charming permanent icons, monograms or sayings to your wine glasses with etching cream. It's an easy-to-apply medium that, when applied to glass will etch a frosted design on the surface.
Share your project photos with #MakeItWithMichaels

Print Project

Step 1

First, click here for the design in Cricut® Design Space™.

Step 2

Remove and design you do not want to cut and size as needed; then cut the designs from stencil vinyl.

Step 3

Use a weeder tool to remove the excess vinyl so the open areas in your stencil are the areas that will be etched onto your glass.

Step 4

Use transfer tape to transfer the design from the vinyl backer paper to your glass.
TIP:  To do this, cut a piece of transfer tape a little larger than your design. Place the tape, sticky-side down, onto your design, burnish and then remove the backer paper from the vinyl. Now, place the tape with your design where you want it on your glass, burnish and slowly remove the tape.

Step 5

Brush a generous amount of etching cream over the open areas of your stencils. Let dry for 15 minutes.
TIP: Use vinyl gloves to protect your hands.

Step 6
Remove the stencil vinyl then rinse under water to remove the etching cream.

Share your project photos with #MakeItWithMichaels
Supplies
Materials
Materials
 
  • img
    You’ll Need: 1

    Multi Purpose Vinyl Gloves by ArtMinds™

    Item # 10358199 
    $5.49
  • img
    You’ll Need: 1

    Libbey® Stemless Wine Glasses

    Item # 10507646 
    $3.99
 
Tools
Tools
 
  • img
    You’ll Need: 1

    Golden Taklon Wash 3 Pieces Brush Set by Craft Smart®

    Item # 10408290 
    $8.99
  • img
    You’ll Need: 1

    FolkArt® Glass Etching Cream

    Item # 10514737 
    Pricing and Availability May Vary In Stores
    $17.99
 
You’ll Also Need
  • Computer
  • Rubbing Alcohol
  • Paper Towel(s)
Instructions
Step 1

First, click here for the design in Cricut® Design Space™.

Step 2

Remove and design you do not want to cut and size as needed; then cut the designs from stencil vinyl.

Step 3

Use a weeder tool to remove the excess vinyl so the open areas in your stencil are the areas that will be etched onto your glass.

Step 4

Use transfer tape to transfer the design from the vinyl backer paper to your glass.
TIP:  To do this, cut a piece of transfer tape a little larger than your design. Place the tape, sticky-side down, onto your design, burnish and then remove the backer paper from the vinyl. Now, place the tape with your design where you want it on your glass, burnish and slowly remove the tape.

Step 5

Brush a generous amount of etching cream over the open areas of your stencils. Let dry for 15 minutes.
TIP: Use vinyl gloves to protect your hands.

Step 6
Remove the stencil vinyl then rinse under water to remove the etching cream.

Share your project photos with #MakeItWithMichaels
Project Reviews