Loops & Threads™ Adjustable Craft Stand

$59.99

Product Actions

Add to cart options

Loops & Threads™ Adjustable Craft Stand

Item # 10232941 
$59.99

Loops & Threads™ Adjustable Craft Stand

$59.99

Details

Product Actions

Add to cart options

Description


Specially designed to greatly ease your needlework, this flexible stand can be adjusted to just the right height to suit your work style. It also rotates 360 degrees for easy back-knotting.
 
Details:
  • 15" x 15.7" x 36" (38.1cm x 39.8cm x 91.4cm)
  • Ideal for most needle work
  • Easy to assemble, no tools required
  • Assembly instructions included
  • Hoop not included
Contents:
  • 2 feet
  • 1 crossbar
  • 2 uprights
  • 2 bottom uprights with bolt
  • 1 centre upright
  • 2 spacers
  • 1 extension bar
  • 2 short extensions
  • 1 centre extension
  • 1 spinner block
  • 1 top clamp
  • 1 bottom clamp
  • 2 bolts, size 1.5" (3.8 cm)
  • 9 wing nuts
  • 3 bolts, size 2.5" (6.3 cm)
  • 3 plastic knobs
  • 3 bolts, size 4" (10.1 cm)
  • 2 bolts, size 3.5" (8.8 cm)
Specially designed to greatly ease your needlework, this flexible stand can be adjusted to just the right height to suit your work style. It also rotates 360 degrees for easy back-knotting.
 
Details:
  • 15" x 15.7" x 36" (38.1cm x 39.8cm x 91.4cm)
  • Ideal for most needle work
  • Easy to assemble, no tools required
  • Assembly instructions included
  • Hoop not included
Contents:
  • 2 feet
  • 1 crossbar
  • 2 uprights
  • 2 bottom uprights with bolt
  • 1 centre upright
  • 2 spacers
  • 1 extension bar
  • 2 short extensions
  • 1 centre extension
  • 1 spinner block
  • 1 top clamp
  • 1 bottom clamp
  • 2 bolts, size 1.5" (3.8 cm)
  • 9 wing nuts
  • 3 bolts, size 2.5" (6.3 cm)
  • 3 plastic knobs
  • 3 bolts, size 4" (10.1 cm)
  • 2 bolts, size 3.5" (8.8 cm)
jump
Specially designed to greatly ease your needlework, this flexible stand can be adjusted to just the right height to suit your work style. It also rotates 360 degrees for easy back-knotting.
 
Details:
  • 15" x 15.7" x 36" (38.1cm x 39.8cm x 91.4cm)
  • Ideal for most needle work
  • Easy to assemble, no tools required
  • Assembly instructions included
  • Hoop not included
Contents:
  • 2 feet
  • 1 crossbar
  • 2 uprights
  • 2 bottom uprights with bolt
  • 1 centre upright
  • 2 spacers
  • 1 extension bar
  • 2 short extensions
  • 1 centre extension
  • 1 spinner block
  • 1 top clamp
  • 1 bottom clamp
  • 2 bolts, size 1.5" (3.8 cm)
  • 9 wing nuts
  • 3 bolts, size 2.5" (6.3 cm)
  • 3 plastic knobs
  • 3 bolts, size 4" (10.1 cm)
  • 2 bolts, size 3.5" (8.8 cm)
Specially designed to greatly ease your needlework, this flexible stand can be adjusted to just the right height to suit your work style. It also rotates 360 degrees for easy back-knotting.
 
Details:
  • 15" x 15.7" x 36" (38.1cm x 39.8cm x 91.4cm)
  • Ideal for most needle work
  • Easy to assemble, no tools required
  • Assembly instructions included
  • Hoop not included
Contents:
  • 2 feet
  • 1 crossbar
  • 2 uprights
  • 2 bottom uprights with bolt
  • 1 centre upright
  • 2 spacers
  • 1 extension bar
  • 2 short extensions
  • 1 centre extension
  • 1 spinner block
  • 1 top clamp
  • 1 bottom clamp
  • 2 bolts, size 1.5" (3.8 cm)
  • 9 wing nuts
  • 3 bolts, size 2.5" (6.3 cm)
  • 3 plastic knobs
  • 3 bolts, size 4" (10.1 cm)
  • 2 bolts, size 3.5" (8.8 cm)
Shipping & Returns
jump

Shipping & Returns

Shipping

Most products may be shipped via standard ground (delivered in 3-7 business days) or Expedited (1 business day). Orders placed by 11:00 AM Central Time using the Expedited option will ship the same day. View Full Shipping Policy and Pricing ›

Returns

If your Michaels purchase does not meet your satisfaction, you may return it within six months (180 days) of purchase. To return an item, the item must be new, unused and in its original packaging. You may return the item to a Michaels store or by mail. View Full Return Policy ›

From the Manufacturer

You May Also Like

jump Customer Reviews
Loops & Threads™ Adjustable Craft Stand is rated 3.3 out of 5 by 50.
Rated 4 out of 5 by from Exactly as picture This is great for big embroidery projects, it helps taking strain from holding the hoop for a long time. The quality and shape of the product are exactly as shown in the picture. The solid wood provides a sturdy weight to stand alone. I am 168 cm tall, the product is the height of my waist as it's tallest. The only downside is the assembling of the stand, the instructions are very unclear and difficult to understand. It'll need some figuring out for each part from the instructions since none of the parts are labeled.
Date published: 2020-05-22
Rated 1 out of 5 by from No Wing Nuts This stand looks like it would work great but I didn't have wing nuts in my box. I'm sure after I go buy some and I'm able to put it together, it will be great. I'm just disappointed because I wanted to use it tonight.
Date published: 2020-03-11
Rated 4 out of 5 by from This product has good features We added lock washers because it was loosen fairly quickly.
Date published: 2020-03-07
Rated 4 out of 5 by from Great idea but needs some help with slippage. I absolutely the idea the makers had for this contraption. I love using it. The adjustability is so helpful except that it slips. And the tighter you make it the closer the bolts get to being stripped. I dont want to waste this product. I want to improve it. I have tried using small suede leather pieces in between the slats to give it some grip and possibly save the bolts a lil bit it doesn't seem to be working as well as I had hoped. Any helpful thoughts?
Date published: 2020-02-20
Rated 5 out of 5 by from This product makes my cross-stitching so much more Using the hoop stand holder will make life easier with less back aches from leaning I also enjoyed the customer service I received while there.
Date published: 2020-02-20
Rated 1 out of 5 by from waste of money lasted 3 weeks before one of the adjustable knobs would no longer tighten
Date published: 2020-01-19
Rated 3 out of 5 by from Directions are horrible and I am a technical. The directions are very poor, I am technical and could figure it out on my own, however if this was my older sister or mother no way they would get it together. I have not tested how durable it is, but make sure you tighten very well, not just tight turn it the extra turn or two until you can not otherwise will move on you.
Date published: 2020-01-10
Rated 4 out of 5 by from Great for cross stitch! I love this stand. Not sure why everyone had a hard time with assembly; the instructions were very clear and straightforward and between following the simple steps and using the image on the box, it took no more than 20 mins. It’s helpful to be able to flip the clamp part and access the back of your project and I’ve had no issues with durability or instability. Only reason it doesn’t get 5 stars is because I was short one wing nut so had to use an extra I had from a previous project assembly. The 50% off coupon I used made this an even better purchase!
Date published: 2019-09-09
Rated 1 out of 5 by from Lasted 2 days I purchased this Loops and Threads Adjustable Craft Stand on Saturday. I used this 2 days and already the screw that goes into the clamp enabling you to flip the project to see the reverse side is stripped. So Disappointed.
Date published: 2019-07-23
Rated 1 out of 5 by from Not worth the money Product was easy to assemble, but it would not stand up when a cross-stitch hoop was placed in it. Very dissatisfied with this.
Date published: 2019-07-13
Rated 2 out of 5 by from Kinda pricey.. and doesn't balance well. The stand is quite wobbly. It's not adjustable enough for me personally but ita a great starting point
Date published: 2019-06-22
Rated 1 out of 5 by from DISGUSTANG Not only are the instructions unclear and vague as well as difficult to read (small diagrams and short steps), you will be sure to receive a defective wingnut in the batch of wood and screws. I couldn’t even test the thing because of the defected wingnut. I cannot even return it because it has been opened and there is no contact information on the box to even receive a new wingnut. (Can you tell I’m salty about the wingnut?)
Date published: 2019-06-14
Rated 1 out of 5 by from Can't even put it together. In attempting to put this together my wing nuts don't even fit on some of the screws. Super frustrated as I was excited to purchase this stand.
Date published: 2019-02-20
Rated 5 out of 5 by from Exactly what I needed to save my wrists~ This stand was perfect for my hand embroidery projects. You can fit any size hoop and it actually holds them taught. It saves my wrists from holding large hoops for long periods of time. The fabric tension stays taught while working and it's pretty easy to flip over and get to the back to tie off my strand of floss.
Date published: 2018-12-03
Rated 4 out of 5 by from Adjustable craft stand This was the best $40 I have spent in a while, I am finding. I did a large cross stitch project without a stand and found I spent more time adjusting, and rolling up and clipping my fabric (with hair clips, clothes pins, etc.), as I did on the actual stitching, and since I started a new project that is even larger, I decided to try the adjustable stand. It puts together in about a 1/2 hour and all the parts are screwed together. I used the actual picture on the box, in combination with the illustration, because the actual picture was easier in conveying the process. So far, I am finding that I can actually stitch faster, since it's now an easier two handed process (one hand behind the fabric and one in front). The hoop (use the larger hoops with this) can swivel upside down so access to the back side is very easy. I do find that you have to tighten the clamps a little every so often, which is okay, because everything is adjustable. The stand doesn't fall over too easily with a big swatch of Aida cloth in a hoop, left in place, on it. I just set it aside and come back and work on it when I want to. I just pick up this lightweight stand, and move to a different area in the house, so I can set my pattern on a table next to it, with my skein box. I am really liking this product. This is the first stand I have ever tried, and I am not considering anything bigger than this at this point. (I have been cross stitching for many years.)
Date published: 2018-11-28
Rated 4 out of 5 by from Just what I needed! I needed something that would help relieve neck and back tension while I cross stitch and this has been perfect for me! I love that the angles can be adjusted in three different places, so I can put my project at the exact height and angle needed. The wing nuts need to be tightened every so often because of the weight of the project, but I don’t mind. Totally worth the purchase (especially since I was able to get it for half off with a coupon!).
Date published: 2018-11-13
Rated 4 out of 5 by from Great! Love the stand itself but the directions need to be improved. There should be a better picture of the parts and the parts should have a letter to correspond with that picture. Otherwise it's great!
Date published: 2018-11-10
Rated 5 out of 5 by from This product works well for my needlework This stand holds my needlework frame well and spares my having to hold it by hand which makes my hand sore. I can turn the work frame as I need to . It needs only a bit of support. So far so good. It took my husband only a short time to put together.
Date published: 2018-10-14
Rated 5 out of 5 by from This is a GREAT craft sand This craft stand was purchased for my Cross Stitch projects. I already had another one, exactly like this one, that I use for my quilting... it works perfectly for both! Love them!
Date published: 2018-09-25
Rated 5 out of 5 by from Great stand I love this stand, very comfortable, easy to install, i recommended it!!
Date published: 2018-09-24
Rated 4 out of 5 by from Works wonders I am trying to get into cross stitch but keep having problems with it. This has helped me so much. It takes the holding out of the project so it is easier to concentrate on it. Only problem was having to replace a bolt as the threading wasn't working but that was $.50 and it is holding up great
Date published: 2018-08-11
Rated 5 out of 5 by from Perfect I love the ease to build the stand and using it is great. I have two free hands to embroider!
Date published: 2018-07-29
Rated 2 out of 5 by from Too bad about design flaw Design flaw makes this product unusable. Clamp that holds hoop to stand keeps loosing when rotated...too bad, otherwise great idea.
Date published: 2018-07-04
Rated 5 out of 5 by from great stand So i bought this stand because it was the only one that had the features i wanted and that i could buy in stores. i saw the reviews about the instructions not being the best but i was pleasently suprised to see the instructions were easily understood and allowed me to put the stand together in under an hour. the only negative thing i have to say about this is that one of the wing nuts was not threaded so i will have to get a replacement for it but its a minor thing so im not that worried. also if you use your coupons smartly you can get it down to a pretty cheap price, i used a few and got it down to 12$. overall a great stand for the price and would recomend
Date published: 2018-06-20
Rated 5 out of 5 by from A must have for serious embroiderers So helpful when embroidering. Keeps hands from getting tired. Assembly instructions are a bit difficult to read but just take your time. The rotating head makes it easy to see back of your work. The stand is very flexible so you can get in almost any position you want. Very happy with this purchase.
Date published: 2018-04-02
Rated 2 out of 5 by from Nice stand, but knobs don't fit I really like the idea of this craft stand, but like other reviewers wrote, my box arrived damaged and heavily taped - it had clearly been opened before. It took me about an hour to assemble, and no tools are required but a hammer helped get the screws into the base really flush. Only 2 stars because I'm not able to finish assembly, only 1 of 3 plastic knobs included fit the screws. I'm going to see if Michael's can replace them but i'm not optimistic. I'm on the hunt for more wing nuts at the local hardware store to use in lieu of the knobs because those fit, but I haven't yet found any that work. If I can get replacement knobs I'll update the review once I can use the stand.
Date published: 2018-03-26
Rated 4 out of 5 by from Great stand with some issues Really great value! I didn't find the instructions at all confusing like others seem to have. My only complaint is that the plastic knobs that came with the stand are flimsy and stripped the second that I tried to tighten them to get the stand to stay in position. I'm going to have to find another solution.
Date published: 2018-03-23
Rated 2 out of 5 by from Assembly It comes in many pieces that you have to assemble (with really bad instructions).
Date published: 2018-03-16
Rated 4 out of 5 by from I like the concept . Having trouble with the black nobs in that they broke off when I tightened them.
Date published: 2018-03-15
Rated 4 out of 5 by from Instructions Assembly instructions not included, where can I find these
Date published: 2018-02-13
  • y_2020, m_12, d_3, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_50
  • loc_en_CA, sid_10232941, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_michaels